From: luoht (luoht@xxxxxxx)
Date: Thu May 11 2000 - 00:21:48 GMT-3
interface ethernet 0
ip ospf network non-broadcast
neighbor xxx.xxx.xxx.xxx
Correct me if I wrong.
Michael
----- Original Message -----
From: wang xihan
To: kongck ; ccielab@groupstudy.com
Sent: Thursday, May 11, 2000 10:49 AM
Subject: ospf challenge
Hi all
Thank you for the reply , i think i get it.
Here is another quesion.
In a ethernet ospf area , There are three router connect to each
other(r1,r2,r3), For security reasons, I would like r3 to be the DR,
and all router will adjacent to R3 and will not make adjacent to
others, That means when i show ip ospf nei in other routers, only r3
can see r1 and r2, in either r1 and r2 , they can only see r3. There
should be some thing can do it.Can sb tell me how?
Thanks a lot
xihan wang
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:28 GMT-3