From: Richard Mott (richpmott@xxxxxxxxxxx)
Date: Sat Apr 22 2000 - 00:57:52 GMT-3
It will depend how you are using it. A dialer profile would be applied with
dialer pool command. In this case a dialer map can't be used. A dialer
interface using a dialer rotory group is considered a legacy DDR and will
allow dialer map statments to be entered.
Rich Mott
CCIE # 5234
Network Engineer
Jannon Solutions
>From: "tok cok" <tokcok@hotmail.com>
>Reply-To: "tok cok" <tokcok@hotmail.com>
>To: ccielab@groupstudy.com
>Subject: ISDN Dialer profile with dialer map ip command
>Date: Wed, 19 Apr 2000 18:59:37 PDT
>
>Hi all,
>
>I was reading Bruce Calsow's book on ISDN dialer profile.
>In his book, he said that when using Dialer profile, "dialer map ip"
>command
>is not available. The only time we use "dialer map ip command" is on DDR.
>But when I create a dialer interface and do a "show dialer ?", the map
>parameter is available.
>
>Can any help me on this. My question is, can dialer profile also use dialer
>map ip command to map next hop ip address?
>
>Thanks all.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:15 GMT-3