From: Ryan B (rbenigno@xxxxxxxx)
Date: Fri Apr 21 2000 - 23:46:44 GMT-3
R1 -> E0
R2 -> Ring 2 & E0
R3 -> Ring 1
The requirement is to setup DLSw between these three routers. But, only
allow R1's E0 to access R2's E0, and Ring 1 to access Ring 2. Would this be
right?
(This is R2's config)
dlsw port-list 1 Ethernet0
dlsw ring-list 2 rings 2
dlsw remote-peer 1 tcp 192.168.5.5 lf 1500 ! R1
dlsw remote-peer 2 tcp 192.168.3.3 ! R3
The next one has me totally stumped... How would I setup R3 so explorer
packets for the mac 000a.000b.000c would not get forwarded to Ring 2? If
this was SRB without DLSw it could be done with an access-expression, but if
I add an an inbound access-expression to R3's To0 I would also deny that
explorer from getting to R1's ethernet network... Any ideas?
Thanks in advance,
Ryan
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:15 GMT-3