From: Li Chaoyong (hughcyli@xxxxxxxxxxxxxxxxx)
Date: Fri Apr 21 2000 - 10:13:16 GMT-3
I see.
I reload the routers and everything works OK.
----- Original Message -----
From: "George Harizanov" <georgehar@mindspring.com>
To: "Li Chaoyong" <hughcyli@holybridge.com.cn>; "Goh, Winston"
<winston.goh@sg.unisys.com>; <ccielab@groupstudy.com>
Sent: Friday, April 21, 2000 8:57 PM
Subject: Re: How to filter NETBIOS in DLSW PEER
> Li
> APPLETALK DISTRIBUTE-LIST works fine with EIGRP
> you probably have to do SHUT - NO SHUT on the interface and clear the
routes
> in your routing table.
> HTH
> G
>
> ----- Original Message -----
> From: "Li Chaoyong" <hughcyli@holybridge.com.cn>
> To: "Goh, Winston" <winston.goh@sg.unisys.com>; <ccielab@groupstudy.com>
> Sent: Wednesday, April 19, 2000 3:21 AM
> Subject: Re: How to filter NETBIOS in DLSW PEER
>
>
> > APPLETALK DISTRIBUTE-LIST can only filter RTMP routes, can not filter
> EIGRP routes. I tried zip-reply-filter, zone information is filtered, but
> routes is still there.
> >
> > I don't know how to do.
> >
> > Help, help.
> >
> > ----- Original Message -----
> > From: Goh, Winston <winston.goh@sg.unisys.com>
> > To: 'Li Chaoyong' <hughcyli@holybridge.com.cn>; <ccielab@groupstudy.com>
> > Sent: Wednesday, April 19, 2000 9:00 AM
> > Subject: RE: How to filter NETBIOS in DLSW PEER
> >
> >
> > > Hi,
> > > For your second question, create a access-list 600-699 permit/deny the
> cable
> > > range of the appletalk network. Apply the access-list through
appletalk
> > > distribution-list out under the interface coomand. Remember to permit
> > > other-access at the end of your acl. i hope this help.cheers
> > > winston
> > >
> > > -----Original Message-----
> > > From: Li Chaoyong [mailto:hughcyli@holybridge.com.cn]
> > > Sent: Saturday, April 15, 2000 4:15 PM
> > > To: ccielab@groupstudy.com
> > > Subject: How to filter NETBIOS in DLSW PEER
> > >
> > >
> > > I want to know how to configure DLSW peers to allow NETBIOS only.
> > >
> > > Use lsap-output-list ?
> > >
> > > Please help me.
> > >
> > > -----------------------
> > >
> > > Another Question
> > >
> > > In this condition
> > >
> > > R1----------R2
> > >
> > > R1 and R2 is runing APPLETALK EIGRP. How to filter EIGRP APPLETALK
> ROUTE?
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:15 GMT-3