From: Price, Jamie (jprice@xxxxxxxxxxx)
Date: Sat Mar 25 2000 - 16:48:23 GMT-3
Title: RE: dial-type on FXS's ?
There I go again misreading the question - sorry.
I read "Ireland" and jumped straight into it. cptone isnt the answer
you're looking for.
I guess there's a valuable lesson there for all of us :)
Anyway - you cant use dial-type on an FXS because the command is only
applicable to FXO and E&M ports. Dial-type is purely for outgoing
calls. It determines whether to use DTMF or pulse outbound, An FXS
port does not generate outgoing - it is the port leading into the
station/phone. FXO to the CO, FXS to the LAN. Cisco voice ports
autodetect whether the inbound call is DTMF or pulse.
Hope that works better :)
Jamie
-----Original Message-----
From: Kevin Gannon
To: Ccielab@Groupstudy.Com
Sent: 3/25/00 1:24 PM
Subject: dial-type on FXS's ?
Anyone know why with 12.09 code I can not set the dial-type on a FXS
port. I keep seeing the dial-type command in the config guide but a
"?" does not show it up as a command under voice-port x/x/x.
The reason I want to use it is to set a port to use pulse dialing
rather
than DMTF. In Ireland most phones use pulse dialing so my two handsets
only support pulse.
Regards,
Kevin
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:06 GMT-3