X25 and NLSP Adj.

From: Mohan Pokkali (Mohan.Pokkali@xxxxxxxx)
Date: Sat Mar 25 2000 - 12:05:24 GMT-3

• Next message: Rob Ehlers: "RE: memoirs of a CCIE wannabe <--stick the fork in me I'm done"
• Previous message: Dennis E. Bates: "RE: CCIE #5738"
• Next in thread: clou@xxxxxxxxxxxxxx: "Re: X25 and NLSP Adj."
• Maybe reply: clou@xxxxxxxxxxxxxx: "Re: X25 and NLSP Adj."
• Maybe reply: kongck: "Re: X25 and NLSP Adj."
• Maybe reply: Ryan B: "Re: X25 and NLSP Adj."
• Maybe reply: Mohan Pokkali: "RE: X25 and NLSP Adj."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi

Can not figure out why R3 not forming NLSP adj. with R2 and vice-versa.
Getting routing updates if rip on x25 int is set to auto even w/o forming
adj.
If rip on x25 int is disabled no routing updates coming through.

R3 -------X25-----R2--------Ethernet--------R5

hostname R3

ipx routing 0003.0003.0003

!
interface Serial0/1
 no ip address
 encapsulation x25 dce
 no ip mroute-cache
 x25 address 6789
 clockrate 64000
!
interface Serial0/1.1 point-to-point

 x25 map ipx 23.0002.0002.0002 1234 broadcast

 ipx network 23
 ipx nlsp enable
!
ipx router nlsp
 area-address 0 0

R3#sh ipx nlsp neighbors
NLSP Level-1 Neighbors: Tag Identifier = notag

System Id Interface State Holdtime Priority Cir Adj Circuit Id

• Next message: Rob Ehlers: "RE: memoirs of a CCIE wannabe <--stick the fork in me I'm done"
• Previous message: Dennis E. Bates: "RE: CCIE #5738"
• Next in thread: clou@xxxxxxxxxxxxxx: "Re: X25 and NLSP Adj."
• Maybe reply: clou@xxxxxxxxxxxxxx: "Re: X25 and NLSP Adj."
• Maybe reply: kongck: "Re: X25 and NLSP Adj."
• Maybe reply: Ryan B: "Re: X25 and NLSP Adj."
• Maybe reply: Mohan Pokkali: "RE: X25 and NLSP Adj."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:06 GMT-3