Re: X25 and NLSP Adj.

From: kongck (kongck@xxxxxxxxxxxxxx)
Date: Sun Mar 26 2000 - 10:00:02 GMT-3

• Next message: Kevin Gannon: "IPSec Problem !."
• Previous message: Mark S. Detrick: "Re: VLAN Design Question"
• Maybe in reply to: Mohan Pokkali: "X25 and NLSP Adj."
• Next in thread: Ryan B: "Re: X25 and NLSP Adj."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
u r missing "x25 htc".

----- Original Message -----
From: Mohan Pokkali <Mohan.Pokkali@USKO.com>
To: Ccielab@Groupstudy. Com (E-mail) <ccielab@groupstudy.com>
Sent: Saturday, March 25, 2000 11:05 PM
Subject: X25 and NLSP Adj.

> Hi
>
> Can not figure out why R3 not forming NLSP adj. with R2 and vice-versa.
> Getting routing updates if rip on x25 int is set to auto even w/o forming
> adj.
> If rip on x25 int is disabled no routing updates coming through.
>
> R3 -------X25-----R2--------Ethernet--------R5
>
>
>
>
>
> hostname R3
>
>
> ipx routing 0003.0003.0003
>
> !
> interface Serial0/1
> no ip address
> encapsulation x25 dce
> no ip mroute-cache
> x25 address 6789
> clockrate 64000
> !
> interface Serial0/1.1 point-to-point
>
> x25 map ipx 23.0002.0002.0002 1234 broadcast
>
> ipx network 23
> ipx nlsp enable
> !
> ipx router nlsp
> area-address 0 0
>
>
> R3#sh ipx nlsp neighbors
> NLSP Level-1 Neighbors: Tag Identifier = notag
>
> System Id Interface State Holdtime Priority Cir Adj Circuit Id
>

• Next message: Kevin Gannon: "IPSec Problem !."
• Previous message: Mark S. Detrick: "Re: VLAN Design Question"
• Maybe in reply to: Mohan Pokkali: "X25 and NLSP Adj."
• Next in thread: Ryan B: "Re: X25 and NLSP Adj."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:06 GMT-3