From: Mohan Pokkali (Mohan.Pokkali@xxxxxxxx)
Date: Mon Mar 27 2000 - 06:19:07 GMT-3
Hi All
"ipx internal-network" was missing on R3.
I *Thought* I had it there.
Simple mistake.
Not good if you do that in lab.
Thanks
Mohan
-----Original Message-----
From: Ryan B [mailto:rbenigno@home.com]
Sent: 26 March 2000 11:15
To: kongck; Mohan Pokkali; Ccielab@Groupstudy. Com (E-mail)
Subject: Re: X25 and NLSP Adj.
The default for "x25 htc" is 1024, it's not a required command. I think the
problem is the lack of a "ipx internal-network"
-Ryan
----- Original Message -----
From: kongck <kongck@rocketmail.com>
To: Mohan Pokkali <Mohan.Pokkali@USKO.com>; Ccielab@Groupstudy. Com (E-mail)
<ccielab@groupstudy.com>
Sent: Sunday, March 26, 2000 5:00 AM
Subject: Re: X25 and NLSP Adj.
> u r missing "x25 htc".
>
> ----- Original Message -----
> From: Mohan Pokkali <Mohan.Pokkali@USKO.com>
> To: Ccielab@Groupstudy. Com (E-mail) <ccielab@groupstudy.com>
> Sent: Saturday, March 25, 2000 11:05 PM
> Subject: X25 and NLSP Adj.
>
>
> > Hi
> >
> > Can not figure out why R3 not forming NLSP adj. with R2 and vice-versa.
> > Getting routing updates if rip on x25 int is set to auto even w/o
forming
> > adj.
> > If rip on x25 int is disabled no routing updates coming through.
> >
> > R3 -------X25-----R2--------Ethernet--------R5
> >
> >
> >
> >
> >
> > hostname R3
> >
> >
> > ipx routing 0003.0003.0003
> >
> > !
> > interface Serial0/1
> > no ip address
> > encapsulation x25 dce
> > no ip mroute-cache
> > x25 address 6789
> > clockrate 64000
> > !
> > interface Serial0/1.1 point-to-point
> >
> > x25 map ipx 23.0002.0002.0002 1234 broadcast
> >
> > ipx network 23
> > ipx nlsp enable
> > !
> > ipx router nlsp
> > area-address 0 0
> >
> >
> > R3#sh ipx nlsp neighbors
> > NLSP Level-1 Neighbors: Tag Identifier = notag
> >
> > System Id Interface State Holdtime Priority Cir Adj Circuit
Id
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:07 GMT-3