From: Michael Bausenwein (mikeb55@xxxxxxxx)
Date: Sun Jan 23 2000 - 12:35:53 GMT-3
If configuring SVC's you will be connecting to the LS1010, but you will not
touch the config.
You can acutally configure the LECS' NSAP address on the client using the
lane config-atm-address command
This will override the one provided by ILMI, or well know VC
----- Original Message -----
From: <B168277@aol.com>
To: <sthong@ascend.co.jp>
Cc: <ccielab@groupstudy.com>
Sent: Sunday, January 23, 2000 6:47 AM
Subject: lab and ATM LS1010 (was Re: Re[2]: CCIE #5478)
> Jinho,
>
> I realize now that there won't be any configuration of an ATM switch.
>
> I know that you can configure ATM interfaces back-to-back for PVC's , but
> there
> has to be some type of atm switch in place for ATM SVC's. Also the LEC
> learns the
> NSAP address of the LECS from the switch, and that the ATM switch needs to
be
> configured with the NSAP address of the End Point that you designate to be
the
> LECS.
>
> Please correct me if I am not correct in my thinking.
>
> Bob Faetanini
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:45 GMT-3