From: naushad prasla (naushad.prasla@xxxxxxxxx)
Date: Sun Jan 23 2000 - 14:27:13 GMT-3
Ture but not necessarily, LEC can be configured on the Router with an ATM
inteface. Use this interfaces LEC address to configure other ATM interfaces
without any configuration on the Switch.
Naushad Prasla
B168277@aol.com wrote:
> Jinho,
>
> I realize now that there won't be any configuration of an ATM switch.
>
> I know that you can configure ATM interfaces back-to-back for PVC's , but
> there
> has to be some type of atm switch in place for ATM SVC's. Also the LEC
> learns the
> NSAP address of the LECS from the switch, and that the ATM switch needs to be
> configured with the NSAP address of the End Point that you designate to be th
e
> LECS.
>
> Please correct me if I am not correct in my thinking.
>
> Bob Faetanini
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:45 GMT-3