ipx, eigrp, and frame relay

From: Pylko, Eric (EPylko@xxxxxxxxxxx)
Date: Thu Jan 20 2000 - 14:48:51 GMT-3

   
Hi everyone-

I have the following network setup:

           R5
           | (point to multipoint)
         Frame
         Relay
         / \
        R3 R2---R1

R3 and R2 are connected on their physical interfaces.

I have ipx eigrp enabled on all the routers. I can see all routes on all
routers.

Now, when I try to do an ipx ping from R3 to R2, R3 to R1, or R1/R2 to R3, I
do not get a reply. I can ipx ping from R3 to R5, R5 to R2 and R5 to R1.

I have tried frame-relay map statements, default routes, frame-relay inverse
arp, ipx eigrp split-horizon, no ipx eigrp split horizon, and rebooting.

Am I missing something that will allow R3 to ipx ping R2 or R1? When doing
something similar with Appletalk, I had to give the command "appletalk
local-routing" on R5. I don't see a similar command for IPX.

Any ideas? A tunnel between R3 and R2 would work, but is there any other
ipx command that would help?

Thanks

-Eric

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:45 GMT-3