From: Ben Rife (brife@xxxxxxxxxx)
Date: Thu Jan 13 2000 - 14:09:44 GMT-3
I am trying to estab an appletalk (eigrp) connection over frame using
IETF encapsulation. I can not get the two routers to verify, and
estab. a connection. Can someone help.
R2#
appletalk routing eigrp 2
interface Serial0
ip address 172.17.59.98 255.255.255.240
encapsulation frame-relay IETF
ip ospf network broadcast
ip ospf priority 0
no ip mroute-cache
appletalk cable-range 2-2 2.2
appletalk zone two
ipx network BBB
no fair-queue
frame-relay map appletalk 2.1 101 broadcast IETF
frame-relay map appletalk 2.4 101 broadcast IETF
frame-relay map ipx BBB.0000.0000.0001 101 broadcast IETF
frame-relay map ipx BBB.0000.0000.0004 101 broadcast IETF
frame-relay map ip 172.17.59.97 101 broadcast IETF
frame-relay map ip 172.17.59.99 101 broadcast IETF
R4#
appletalk routing eigrp 4
interface Serial0.2 multipoint
ip address 172.17.59.97 255.255.255.240
no ip directed-broadcast
ip ospf network broadcast
ip ospf priority 255
appletalk cable-range 2-2 2.4
appletalk zone two
appletalk protocol eigrp
no appletalk protocol rtmp
ipx input-sap-filter 1000
ipx network BBB
frame-relay map appletalk 2.2 100 broadcast IETF
frame-relay map ipx BBB.0000.0000.0001 200 broadcast IETF
frame-relay map ipx BBB.0000.0000.0002 100 broadcast IETF
frame-relay map ip 172.17.59.98 100 broadcast IETF
frame-relay map ip 172.17.59.99 200 broadcast IETF
R4#sh app int s0.2
Serial0.2 is up, line protocol is up
AppleTalk port disabled, Acquiring port net information
AppleTalk cable range is 2-2
AppleTalk address is 2.4, Valid
AppleTalk zone is "two"
Routing protocols enabled: EIGRP
AppleTalk discarded 14 packets due to output errors
AppleTalk address gleaning is not supported by hardware
AppleTalk route cache is enabled
Thanks, Ben
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:44 GMT-3