From: Richardson, Cheryl (cheryl.richardson@xxxxxxxx)
Date: Thu Jan 13 2000 - 16:26:58 GMT-3
Ben,
I do not see "app proto eigrp", "no app proto rtmp" on R2.
Cheryl
> -----Original Message-----
> From: Ben Rife [SMTP:brife@bignet.net]
> Sent: Thursday, January 13, 2000 12:10 PM
> To: ccielab@groupstudy.com
> Subject: Appletalk and Frame-Relay
>
> I am trying to estab an appletalk (eigrp) connection over frame using
> IETF encapsulation. I can not get the two routers to verify, and estab. a
> connection. Can someone help.
>
> R2#
> appletalk routing eigrp 2
>
> interface Serial0
> ip address 172.17.59.98 255.255.255.240
> encapsulation frame-relay IETF
> ip ospf network broadcast
> ip ospf priority 0
> no ip mroute-cache
> appletalk cable-range 2-2 2.2
> appletalk zone two
> ipx network BBB
> no fair-queue
> frame-relay map appletalk 2.1 101 broadcast IETF
> frame-relay map appletalk 2.4 101 broadcast IETF
> frame-relay map ipx BBB.0000.0000.0001 101 broadcast IETF
> frame-relay map ipx BBB.0000.0000.0004 101 broadcast IETF
> frame-relay map ip 172.17.59.97 101 broadcast IETF
> frame-relay map ip 172.17.59.99 101 broadcast IETF
>
> R4#
> appletalk routing eigrp 4
> interface Serial0.2 multipoint
> ip address 172.17.59.97 255.255.255.240
> no ip directed-broadcast
> ip ospf network broadcast
> ip ospf priority 255
> appletalk cable-range 2-2 2.4
> appletalk zone two
> appletalk protocol eigrp
> no appletalk protocol rtmp
> ipx input-sap-filter 1000
> ipx network BBB
> frame-relay map appletalk 2.2 100 broadcast IETF
> frame-relay map ipx BBB.0000.0000.0001 200 broadcast IETF
> frame-relay map ipx BBB.0000.0000.0002 100 broadcast IETF
> frame-relay map ip 172.17.59.98 100 broadcast IETF
> frame-relay map ip 172.17.59.99 200 broadcast IETF
>
> R4#sh app int s0.2
> Serial0.2 is up, line protocol is up
> AppleTalk port disabled, Acquiring port net information
> AppleTalk cable range is 2-2
> AppleTalk address is 2.4, Valid
> AppleTalk zone is "two"
> Routing protocols enabled: EIGRP
> AppleTalk discarded 14 packets due to output errors
> AppleTalk address gleaning is not supported by hardware
> AppleTalk route cache is enabled
>
> Thanks, Ben
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:44 GMT-3