From: zhencai (zhencai@xxxxxxxx)
Date: Thu Jan 13 2000 - 02:21:54 GMT-3
Hi,
According to Cisco documentation, DLSW+ doesn't provide local translation
between token ring and ethernet. However, it does in my case:
win95
/ <----tokenring0
-------2510============2513
to0 s0 s0 \ <----ethernet0
winnt
2510:
source-bridge ring-group 100
dlsw local-peer peer-id 10.1.1.1
dlsw remote-peer 0 tcp 10.1.1.2
!
interface tokenring 0
ip address 10.4.1.1 255.255.255.0
source-bridge 10 1 100
source-bridge spanning
!
interface serial 0
ip address 10.1.1.1 255.255.255.0
!
router rip
network 10.0.0.0
2513:(NO source-bridge transparent command!!!)
source-bridge ring-group 100
dlsw local-peer peer-id 10.1.1.2
dlsw remote-peer 0 tcp 10.1.1.1
dlsw bridge-group 1
!
interface tokenring 0
ip address 10.2.1.1 255.255.255.0
source-bridge 20 1 100
source-bridge spanning
!
interface ethernet 0
ip address 10.3.1.1 255.255.255.0
bridge-group 1
!
interface serial 0
ip address 10.1.1.2 255.255.255.0
clock rate 64000
!
bridge 1 protocol ieee
!
router rip
network 10.0.0.0
win95 and winnt have only NetBEUI enabled. I can see win95 from winnt and
vice versa. Any idea?
Thanks a lot.
Zhen Cai
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:44 GMT-3