From: Darrel E. Hinshaw (dhinshaw@xxxxxxxxxxxxx)
Date: Mon Jan 10 2000 - 12:19:41 GMT-3
Everyone,
Sorry for responding to this but I have a beef. Could everyone please read
and ReRead an e-mail before you decide to reply to it. As you can see from
the gentleman's response below (I do Appreciate the response but just wish
that it had been appropriate) he provided valid correct information but if
he had read my original e-mail he would have seen the summary-address
command that he referred to and could have perhaps shed more useful light on
the issue.
This is not meant to bruise anybody's feeling but rather this should be
taken as constructive criticism that will allow this list to become more
productive for all of us.
***** RESPONSE ******
Summarise all routes to /24 at area boundaries.Since major class is same and
mask is same all routes shoud go in to IGRP.U can use summary-address also
for this purpose.
***** ORIGINAL *****
All:
First I'm sorry for making this so long.
Great deal of difficulty here. The usual parameter of NO static routes of
any kind are in effect.
R1-->S0------(OSPF 0)------S0<--R2-->E0------(IGRP)------E0<--R3-->E1
Interface Addresses:
R1/S0: 150.100.4.5/24 OSPF Area 0
R1/L0: 150.100.5.5/30 OSPF Area 0
R2/S0: 150.100.4.3/24 OSPF Area 0
R2/L0: 150.100.5.9/30 OSPF Area 0
R2/E0: 150.100.128.1/24 IGRP
R3/E0: 150.100.128.2/24 IGRP
R3/E1: 150.100.129.1/24 IGRP
Problem: How do I distribute OSPF into IGRP on R2? I have configured but I
am unable to get any 150.100.5.x addresses to show up in R3's routing table.
Below are the relevant Configs.
Router 1:
router ospf 5
network 150.100.4.0 0.0.0.255 area 0
network 150.100.5.5 0.0.0.0 area 0
network 150.100.14.0 0.0.0.255 area 3
area 0 authentication message-digest
area 3 range 150.100.14.0 255.255.255.0
area 3 virtual-link 150.100.3.1
Router 2:
router ospf 5
summary-address 150.100.5.0 255.255.255.0
redistribute igrp 5 subnets route-map igrpn2ospf
network 150.100.4.0 0.0.0.255 area 0
network 150.100.5.9 0.0.0.0 area 0
area 0 authentication message-digest
area 0 range 150.100.4.0 255.255.255.0
area 0 range 150.100.5.0 255.255.255.0
router igrp 5
redistribute ospf 5 metric 10000 10 255 1 1500 route-map ospfn2igrp
passive-interface Loopback0
passive-interface Serial0
passive-interface Serial0.110
network 150.100.0.0
network 0.0.0.0
ip classless
access-list 1 permit 150.100.128.0 0.0.127.255
access-list 2 deny 150.100.128.0 0.0.127.255
access-list 2 permit any
!
route-map igrpn2ospf permit 10
match ip address 1
!
route-map ospfn2igrp permit 10
match ip address 2
Router 3:
router igrp 5
network 150.100.0.0
ip classless
ANY help would be appreciated.
Regards,
Darrel Hinshaw
PS If you have actually read this far . . . THANKS.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:43 GMT-3