From: Mike McSpedon (Mike@xxxxxxxx)
Date: Thu Dec 23 1999 - 12:15:39 GMT-3
Chad,
I was able to get it to work just fine last night for IP, IPX, and AT using
dialer interfaces on the hub router using 2500s and 11.3(5). FWIW, there
is a Tech Tip on CCO at http://www.cisco.com/warp/public/129/21.html that
shows the server configured on a dialer interface. Is there, perhaps, an
IOS bug in one of the code levels that causes Snapshot routing not to work
with logical interfaces?
Just thought I'd add my .02...
-Mike
At 05:42 PM 12/21/99 -0800, Chad Marsh wrote:
>You can do snapshot routing on dialer interfaces if you use rotory
>groups, it will not work with dialer pools.
>
>Chad Marsh
>CCIE# 5185
>
>Curtis Phillips wrote:
>>
>> Hello,
>>
>> I was curious to find Caslow's example of snapshot routing in his book
>> to reference legacy (physical) interface configuration for snapshot
routing.
>> Is it workable to perform config on Dialer interface instead?
>>
>> I have a had little luck.
>>
>> Please advise and send config if possible..
>>
>> Regards,
>>
>> Curtis
>>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:00 GMT-3