From: Chad Marsh (chad@xxxxxx)
Date: Thu Nov 04 1999 - 23:38:34 GMT-3
Benjy, you have to enter: enable {level}
For example:
Router> enable 2
Password: password
Router# sho run
etc.
Chad Marsh
> Benjy Rife wrote:
>
> Hi Guys,
>
> I'm trying to configure my router to allow differing access to
> commands based on Privilege levels, Usernames, Passwords, etc. Here is
> a sample config.
>
>
> username brife privilege 10 password <password>
>
> enable secret level 10 <password>
> enable secret level 2 <password>
> enable secret level 15 <password>
>
> privilege exec level 2 show run
> privilege exec level 10 sh ip route
>
> When I login to the console, and attempt to enter exec mode, It will
> only accept the level 15 password, none of the others work. If I
> remove the level 15 password from the config, and try to login, I am
> never prompted for one. How can I force users to login with differing
> privilege levels?
>
> Thanks for you help,
>
> Ben
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:55 GMT-3