From: Brian Van Benschoten (vader@xxxxxxxxxxxx)
Date: Thu Nov 04 1999 - 17:48:46 GMT-3
I'm having trouble with this running over a Async interface. (no ISDN at
home)
dialing between 2 routers , both in area 0, the dial link is in area 0.
dialer list is ip permit
after I add the Async subnet to the OSPF router, dialing starts. They
connect. ( PPP is working fine I can ping across) Hellos flow, neighbors
are made. Then, the hellos are suppressed, the dialer timer expires and the
line hangs up.
a few seconds later it dials again ( due to an interesting hello packet) and
does the whole thing over again
while its connected if you do a "sh ip ospf database" you see the LSA
packets. They dont have the DNA tag attached to them.
I thought that with "on demand" the LSAs would get a "do not age" (DNA)
and stay in the table. after the dial line went down. if the primary line
dropped, traffic should start to flow towards those DNA paths right ?
Is there something strange about doing this over async / ppp ?
6 days left......
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:55 GMT-3