From: Mike Wang (mike_wang51@xxxxxxxxxxx)
Date: Wed Oct 20 1999 - 04:04:33 GMT-3
Sorry, forget to say question 2 the protocol is PIM SM or PIM DM
>From: "Mike Wang" <mike_wang51@hotmail.com>
>To: ccielab@groupstudy.com
>CC: mike_wang51@hotmail.com
>Subject: ip multicast
>Date: Wed, 20 Oct 1999 03:02:46 EDT
>
>Hi,
>
>I saw some ip multicast config samples. Questions are:
>
>1. sometimes people put "ip dvmrp route-limit 7000" command in the config,
>however the protocol is PIM DM or PIM SM, question is WHEN do we need to
>use this command as a MUST.
>
>2. If the question specifies rp address then we need to put "ip rp.. " with
>access list point to that 224.x.x.x address, if the question does not say
>specifically rp, just tell you multicast address, then we need to put "ip
>igmp join 224.x.x.x" under each paritcipation interface, right? I saw both
>config either use rp or igmp, just do not know when to use which one,
>therefore hope some one could help me. Thanks,
>
>Mike
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:53 GMT-3