From: Seth Chen (seth-cs_chen@xxxxxx)
Date: Sat Sep 18 1999 - 00:23:04 GMT-3
Or,alternatively, enable auto-summary under router bgp 100.
Seth Chen
bcarter@family-net.net wrote:
> Try
> bgp 100
> network 10.1.1.0 mask 255.255.255.0
>
> "Richardson, Cheryl" wrote:
>
> > Have you tried specifying the mask on the network command..
> >
> > network 10.1.1.0 mask 255.255.255.0
> >
> > It must match what the routing table entry looks like.
> >
> > Cheryl Richardson
> >
> > > -----Original Message-----
> > > From: Jason Aarons [SMTP:jaarons@hotmail.com]
> > > Sent: Friday, September 17, 1999 9:05 AM
> > > To: ccielab@groupstudy.com
> > > Subject: BGP: network x.x.x.x where x.x.x.x is a loopback fails
> > >
> > > hostname R1
> > > !
> > > interface Loopback0
> > > ip address 10.1.1.1 255.255.255.0
> > > !
> > > router bgp 100
> > > network 10.1.1.0
> > > neighbor 192.168.1.1 remote-as 200
> > > no auto-summary
> > >
> > > R1#show ip bgp
> > > <empty>
> > >
> > > Anyone having luck with getting a loopback into BGP table using 'network"
> > > command ? If I do a 'redistribute connected' it appears but them I have
> > > to
> > > filter (route-map) etc.
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:50 GMT-3