From: Bill Carter (bcarter@xxxxxxxxxxxxxx)
Date: Fri Sep 17 1999 - 11:27:22 GMT-3
Try
bgp 100
network 10.1.1.0 mask 255.255.255.0
"Richardson, Cheryl" wrote:
> Have you tried specifying the mask on the network command..
>
> network 10.1.1.0 mask 255.255.255.0
>
> It must match what the routing table entry looks like.
>
> Cheryl Richardson
>
> > -----Original Message-----
> > From: Jason Aarons [SMTP:jaarons@hotmail.com]
> > Sent: Friday, September 17, 1999 9:05 AM
> > To: ccielab@groupstudy.com
> > Subject: BGP: network x.x.x.x where x.x.x.x is a loopback fails
> >
> > hostname R1
> > !
> > interface Loopback0
> > ip address 10.1.1.1 255.255.255.0
> > !
> > router bgp 100
> > network 10.1.1.0
> > neighbor 192.168.1.1 remote-as 200
> > no auto-summary
> >
> > R1#show ip bgp
> > <empty>
> >
> > Anyone having luck with getting a loopback into BGP table using 'network"
> > command ? If I do a 'redistribute connected' it appears but them I have
> > to
> > filter (route-map) etc.
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:50 GMT-3