From: Antonio Sabella (Antonio.Sabella@xxxxxxxxxxx)
Date: Wed Sep 15 1999 - 15:53:52 GMT-3
I typed enable "AS SOON" as I received the console prompt. After I typed
enable, I tried entering through the password prompt but it said "sorry". I
can't enter enable mode. What am I doing wrong?
---------------------- Forwarded by Antonio Sabella/USC/AXE on 09/15/99 01:51
PM ---------------------------
nobody@groupstudy.com on 09/14/99 10:04:43 PM
To: jsoricelli@ccci.com@internet@WTAXE,
alfredzh@public1.ptt.js.cn@internet@WTAXE
cc: ccielab@groupstudy.com@internet@WTAXE
Subject: Re: cat5k password recovery
The password is blank for that first little while, so do the following:
boot switch.
Type enable
Hit enter at the password prompt.
Type: set enablepass
Hit enter at the Enter Old Password: prompt.
Then you can set it to whatever you like.
Cheers
Alex.
>>> "alfred zhang" <alfredzh@public1.ptt.js.cn> 15/09/99 13:42:47 >>>
Hi,
After i reboot the cat5k switch,I can enter into the priviledge
mode.But
when i change my enable password,the cat5k switch need the old enable
password.And i don't know the old password.how to do it?
alfred zhang
Joe Soricelli wrote:
> Actually, I think that they are only "blank" for 30 seconds.
>
> -joe
> ------------------------------------------------------------------
> Joseph M. Soricelli, CCIE #4803, CCNP, CCSI #20666
> EMAIL: jsoricelli@ccci.com
>
> Chesapeake Computer Consultants, Inc.
> 8110 Gatehouse Road, Suite 101E Phone: (703) 207-0757
> Falls Church, VA 22042 Fax: (703) 207-0441
>
> FYI - About Chesapeake: We are a Cisco Certified Training and
> professional services partner. We offer most of the Cisco
> training courses as well as training for Fore, NetScout, and
> CheckPoint-1 Firewalls. We provide network consulting services,
> including design, network health, management, firewall,
> and problem solving. We now have 22 CCIEs on our staff
> of instructor/consultants.
> -------------------------------------------------------------------
>
> -----Original Message-----
> From: Alex Dean <Alex.Dean@telecom.co.nz>
> To: ccielab@groupstudy.com <ccielab@groupstudy.com>;
> alfredzh@public1.ptt.js.cn <alfredzh@public1.ptt.js.cn>
> Date: Tuesday, September 14, 1999 3:54 AM
> Subject: Re: cat5k password recovery
>
> >Just reboot it. The password is blank for the first two minutes
after
> >booting.
> >
> >>>> "alfred zhang" <alfredzh@public1.ptt.js.cn> 14/09/99 18:58:01
>>>
> >Hi,
> >
> > I need your help.Can anybody tell me how to recovery cat5k's
> >password and enable password?I hope that I don't need to change my
> >config-file in order to recovery password.
> > Thanks a lot.
> >
> > alfred zhang
> >99/9/14
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:50 GMT-3