From: Bill Carter (bcarter@xxxxxxxxxxxxxx)
Date: Thu Aug 19 1999 - 14:34:51 GMT-3
I need a little clarification, and this should help you Jason. If the ATM LANE
module on the Cat 5XXX is connected to the LS1010, does the LANE module need to
be configured as the LECS Server. Meaning, do I need :
lane database CCIE
name elan 1 server-atm-address xx.xxxx.........
int ATM0.1 multipoint
lane client ethernet 1 elan1
To restate. Do I configure the LANE module to be the LECS?
Jason Aarons wrote:
> CCIE LAB ATM POSSIBILITES
> http://www.cisco.com/warp/public/625/ccie/ATM_FAQs.html
> 3600 series routers
> 2500 series routers
> 4000 and 4500 series routers
> Catalyst 5000 series switches
> You just have to be able to configure as ATM client no switches.
>
> I reviewed ATM Offerings
> http://www.cisco.com/warp/public/cc/sol/mkt/ent/atm/
>
> I doubt my lab 3600 will have a ATM Module as it requires 12.0(4)T and was
> released in March. The 2500 doesn't do ATM. That only leaves the 4000's
> NP-1A DS-3 adapter and the Catalyst 5000 to configure.
>
> My question is since we are only configuring an ATM client what
> hardware/part would you use on the Cat5000 ? The Lightstream 1010 in slot
> 13 makes it a switch so that rules it out. What part am I missing here ?
> ATM line card for slots 1-12 ?
>
> check "show lane server", "show lane bus" verify ATM switch is good and get
> elan name.
>
> int ATM0
> no ip addr
> atm pvc 1 0 5 qsall
> atm pvc 2 0 16 ilmi
> lane config auto-config-atm-address
>
> int ATM0.1 multipoint
> ip addr x.x.x.x y.y.y.y
> lane server-bus ethernet elanname1 <---get from show lane bus
> lane client ethernet elanname1
>
> See anything wrong for ATM client ?
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:47 GMT-3