From: Richardson, Cheryl (cheryl.richardson@xxxxxxxx)
Date: Mon Aug 09 1999 - 11:00:50 GMT-3
Eng Wee,
If the other suggestions do not work, you may want to try placing the
global command "appletalk local-routing" at the hub router.
Reference page 546 of Caslow's BRS book..
Cheryl Richardson
> -----Original Message-----
> From: Chuah Eng Wee [SMTP:chuahew@cyberway.com.sg]
> Sent: Monday, August 09, 1999 1:46 AM
> To: ccielab@groupstudy.com
> Subject: appletalk frame relay ping own interface
>
> Hi..
>
> Have some problems with this appletalk in frame relay environment :
>
> basically 3 router is hub and spoke topology. Hub router use
> multipoint subinterface, spoke router use physical interface.
>
> The spoke router cannot ping the other spoke router and its own interface
> despite having the config below
>
>
> interface Serial0
> ip address 137.20.1.3 255.255.255.0
> encapsulation frame-relay
> ip ospf network broadcast
> ip ospf priority 0
> appletalk cable-range 1002-1002 1002.221
> appletalk zone r1r3r5serial
> appletalk protocol eigrp
> no appletalk protocol rtmp
> frame-relay map appletalk 1002.221 301 broadcast (map to itself)
> frame-relay map appletalk 1002.103 301 broadcast (map to another
> spoke)
> frame-relay map appletalk 1002.243 301 broadcast (map to hub)
> frame-relay map ip 137.20.1.3 301 broadcast
> frame-relay map ip 137.20.1.5 301 broadcast
> frame-relay map ip 137.20.1.1 301 broadcast
>
> Debug apple packet doesn't shows any encap failure.
>
> Did i miss out anything ??
>
>
> Thanks
> ENg Wee
>
>
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:46 GMT-3