From: Chuah Eng Wee (chuahew@xxxxxxxxxxxxxxx)
Date: Mon Jul 05 1999 - 22:59:32 GMT-3
Hi,
Attached is the config.
Basically, there are 3 routers :
R1 - ASBR
R2 - OSPF domain
R5 - RIP domain
everything works as expected even without the distribute list command.
Q: how can I know that route redistributed from RIP domain to the OSPF domain
is fed back to the RIP domain again. There are no distibute list command, so
I would expect this to happen, but how can I see it ??
Rgds
ENg Wee
At 18:51 05/07/99 -0400, Fred Ingham wrote:
>Without seeing the configuration, I would surmise that split horizon is
>on. Check on the RIP router with sh ip interface ___.
>
>Chuah Eng Wee wrote:
>>
>> hi,
>>
>> I have an ASBR doing mutual redistrution between RIP and OSPF. Everything
>> is working as expected. But
>> there are some points that I would like to clarify.
>>
>> - when I redistribute OSPF route (external route) into the RIP domain, will
>> the RIP process redistribute
>> THAT route back to the OSPF domain if mutual redistribution is performed ?
>> I have tried it out, the
>> RIP did know the OSPF redistributed routes, but it does not redistribute
>> the route back to the OSPF process.
>> Why ?? There are no distribute list configured.
>>
>> Any help greatly appreciated.
>>
>> Thanks
>> ENg Wee
>>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:41 GMT-3