From: John Howell (jhowell@xxxxxxxxxxxx)
Date: Mon May 17 1999 - 12:04:48 GMT-3
Sub int point to point will work. Sub int multipoint will not work b/c of
split horizon.
Thanks,
John T. Howell
Cohesive Technology Solutions
Senior Consultant/Engineer
CCNP/CCDP, MCSE+I, MCNE
225-751-6100
225-751-6200 (fax)
-----Original Message-----
From: Mark, Detrick [mailto:mdetrick@cisco.com]
Sent: Monday, May 17, 1999 11:31 AM
To: Vaughan Lee
Cc: ccielab@groupstudy.com
Subject: Re: IPX over Frame Relay
Using subinterfaces won't make any difference. Split Horizon for the IPX
RIP will still be enabled.
Mark Detrick
DSL Business Unit
Cisco Systems
2569 McCabe Way
Irvine, CA 92614
----- Original Message -----
From: Vaughan Lee <vaughan.lee@debis.co.uk>
To: 'Ben Rife' <brife@bignet.net>; <ccielab@groupstudy.com>
Sent: Monday, May 17, 1999 1:29 AM
Subject: RE: IPX over Frame Relay
> I'm not sure if I'm missing out on something here, but isn't this a good
> occasion to use sub-interfaces with the frame-relay connection?
>
> Regards,
> Vaughan Lee, Network Specialist.
> debis IT Services (UK) Ltd.
> E-mail: vaughan.lee@debis.co.uk
> Direct Phone: 01908 279561
> Direct Fax: 01908 279061
> http://www.debis.co.uk/
>
>
>
> -----Original Message-----
> From: Ben Rife [mailto:brife@bignet.net]
> Sent: 14 May 1999 18:23
> To: ccielab@groupstudy.com
> Subject: IPX over Frame Relay
>
>
> Hi Everyone,
> Two months from today is the big day in RTP!
>
> Question: In my lab, I have a partial mesh Frame Relay setup. I
> understand that you can not disable split-horizon for IPX/RIP on the Hub
> router to avoid issues with split-horizon. What are my options to route
> traffic between my spokes, other than eigrp, or static/default routes?
>
>
> Regards,
> Benjy Rife
> MCSE, CNE, CCIE Candidate
> brife@bignet.net
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:37 GMT-3