From: Scott Morris (SMorris@xxxxxxxxxxxxx)
Date: Mon May 17 1999 - 17:06:53 GMT-3
That depends on whether you configure your hub with a separate subinterface
for each spoke... If you're practicing for the lab, the chances of them
letting you do that are pretty slim! Either learn IPX on multipoint
interfaces, or consider tunneling.
Scott
smorris@tele-tech.com
-----Original Message-----
From: Vaughan Lee [mailto:vaughan.lee@debis.co.uk]
Sent: Monday, May 17, 1999 12:57 PM
To: 'Mark, Detrick'
Cc: 'ccielab@groupstudy.com'
Subject: RE: IPX over Frame Relay
I'm going to have to play with this in the lab, but surely subinterfaces
act as separate interfaces. If you've got one subinterface on one IPX
network and a second subinterface on another IPX network, won't RIP
updates be passed between the two even though they are on the same
physical interface? Split horizon shouldn't get in the way here.
Vaughan Lee, Network Specialist.
debis IT Services (UK) Ltd.
E-mail: vaughan.lee@debis.co.uk
Direct Phone: 01908 279561
Direct Fax: 01908 279061
http://www.debis.co.uk/
-----Original Message-----
From: Mark, Detrick [mailto:mdetrick@cisco.com]
Sent: 17 May 1999 17:31
To: Vaughan Lee
Cc: ccielab@groupstudy.com
Subject: Re: IPX over Frame Relay
Using subinterfaces won't make any difference. Split Horizon for the
IPX
RIP will still be enabled.
Mark Detrick
DSL Business Unit
Cisco Systems
2569 McCabe Way
Irvine, CA 92614
----- Original Message -----
From: Vaughan Lee <vaughan.lee@debis.co.uk>
To: 'Ben Rife' <brife@bignet.net>; <ccielab@groupstudy.com>
Sent: Monday, May 17, 1999 1:29 AM
Subject: RE: IPX over Frame Relay
> I'm not sure if I'm missing out on something here, but isn't this a
good
> occasion to use sub-interfaces with the frame-relay connection?
>
> Regards,
> Vaughan Lee, Network Specialist.
> debis IT Services (UK) Ltd.
> E-mail: vaughan.lee@debis.co.uk
> Direct Phone: 01908 279561
> Direct Fax: 01908 279061
> http://www.debis.co.uk/
>
>
>
> -----Original Message-----
> From: Ben Rife [mailto:brife@bignet.net]
> Sent: 14 May 1999 18:23
> To: ccielab@groupstudy.com
> Subject: IPX over Frame Relay
>
>
> Hi Everyone,
> Two months from today is the big day in RTP!
>
> Question: In my lab, I have a partial mesh Frame Relay setup. I
> understand that you can not disable split-horizon for IPX/RIP on the
Hub
> router to avoid issues with split-horizon. What are my options to
route
> traffic between my spokes, other than eigrp, or static/default routes?
>
>
> Regards,
> Benjy Rife
> MCSE, CNE, CCIE Candidate
> brife@bignet.net
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:37 GMT-3