Hi Ken
No I'm surprised nobody on the list seemed to pitch in neither seeing as we
have multiple IEs who might have the knowledge.
I had to give up but promised to leave it for a rainy day, still waiting for
the clouds ;-)
-- BR Tony > On 26 Feb 2015, at 00:40, 1000baseT_at_gmail.com <1000baset_at_gmail.com> wrote: > > Hi Tony, > > Did you ever make any headway with this? I just finished reading that chapter of the Config Guide as well....it made my head spin :-). I would love to see a full working config that I could use cross-reference. > > Ken > > >> On Mon, Sep 8, 2014 at 11:52 AM, Tony Singh <mothafungla_at_gmail.com> wrote: >> so im trying to follow >> >> http://www.cisco.com/c/en/us/td/docs/switches/metro/me3400/software/release/1 2-2_58_se/configuration/guide/ME3400_scg/swoam.html#wp1109551 >> >> but finding the technology quite difficult in terms of what to configure >> where.... >> >> for example say I have a basic setup of >> >> (CE device) ME3400 --- R1 ----MPLS---- R2----ME3400 (CE device) >> >> >> I want alarms to generate should the MPLS element go down >> >> >> but the following configuration suggests I need the PE devices to also be >> ME3400's >> >> >> Customer-edge switch 1 (CE1) configuration: >> >> Switch# config t >> Switch(config)# interface gigabitethernet0/1 >> Switch(config-if)# port-type nni >> Switch(config-if)# switchport trunk allowed vlan 10 >> Switch(config-if)# switchport mode trunk >> Switch(config-if)# ethernet oam remote-loopback supported >> Switch(config-if)# ethernet oam >> Switch(config-if)# exit >> >> Provider-edge switch 1 (PE1) configuration: >> >> Switch# config t >> Switch(config)# interface gigabitethernet0/5 >> Switch(config-if)# switchport trunk encapsulation dot1q >> Switch(config-if)# switchport mode trunk >> Switch(config-if)# ethernet cfm mip level 7 >> Switch(config-if)# ethernet cfm mep level 4 mpid 100 vlan 10 >> Switch(config-if)# ethernet uni id 2004-20 >> Switch(config-if)# ethernet oam remote-loopback supported >> Switch(config-if)# ethernet oam >> Switch(config-if)# service instance 10 ethernet BLUE >> Switch(config-if-srv)# ethernet lmi ce-vlan map 10 >> Switch(config-if-srv)# exit >> >> Provider-edge switch 2 (PE2) configuration: >> >> Switch# config t >> Switch(config)# interface gigabitethernet1/20 >> Switch(config-if)# switchport mode trunk >> Switch(config-if)# ethernet cfm mip level 7 >> Switch(config-if)# ethernet cfm mep level 4 mpid 101 vlan 10 >> Switch(config-if)# ethernet uni id 2004-20 >> Switch(config-if)# ethernet oam remote-loopback supported >> Switch(config-if)# ethernet oam >> Switch(config-if)# service instance 10 ethernet BLUE >> Switch(config-if-srv)# ethernet lmi ce-vlan map 10 >> Switch(config-if-srv)# exit >> >> Customer-edge switch 2 (CE2) configuration: >> >> Switch# config t >> Switch(config)# interface gigabitethernet0/1 >> Switch(config-if)# port-type nni >> Switch(config-if)# switchport trunk allowed vlan 10 >> Switch(config-if)# switchport mode trunk >> Switch(config-if)# ethernet oam remote-loopback supported >> Switch(config-if)# ethernet oam >> Switch(config-if)# exit >> >> >> if anyone has any experience configuring this technology or setup please >> help us out.. >> >> BR >> >> Tony >> >> >> Blogs and organic groups at http://www.ccie.net >> >> _______________________________________________________________________ >> Subscription information may be found at: >> http://www.groupstudy.com/list/CCIELab.html Blogs and organic groups at http://www.ccie.netReceived on Thu Feb 26 2015 - 01:30:40 ART
This archive was generated by hypermail 2.2.0 : Wed Apr 01 2015 - 06:32:39 ART