Re: Configuring Ethernet OAM, CFM, and E-LMI

Hi Tony,

Did you ever make any headway with this? I just finished reading that
chapter of the Config Guide as well....it made my head spin :-). I would
love to see a full working config that I could use cross-reference.

Ken

On Mon, Sep 8, 2014 at 11:52 AM, Tony Singh <mothafungla_at_gmail.com> wrote:

> so im trying to follow
>
>
> http://www.cisco.com/c/en/us/td/docs/switches/metro/me3400/software/release/12-2_58_se/configuration/guide/ME3400_scg/swoam.html#wp1109551
>
> but finding the technology quite difficult in terms of what to configure
> where....
>
> for example say I have a basic setup of
>
> (CE device) ME3400 --- R1 ----MPLS---- R2----ME3400 (CE device)
>
>
> I want alarms to generate should the MPLS element go down
>
>
> but the following configuration suggests I need the PE devices to also be
> ME3400's
>
>
> Customer-edge switch 1 (CE1) configuration:
>
> Switch# config t
> Switch(config)# interface gigabitethernet0/1
> Switch(config-if)# port-type nni
> Switch(config-if)# switchport trunk allowed vlan 10
> Switch(config-if)# switchport mode trunk
> Switch(config-if)# ethernet oam remote-loopback supported
> Switch(config-if)# ethernet oam
> Switch(config-if)# exit
>
> Provider-edge switch 1 (PE1) configuration:
>
> Switch# config t
> Switch(config)# interface gigabitethernet0/5
> Switch(config-if)# switchport trunk encapsulation dot1q
> Switch(config-if)# switchport mode trunk
> Switch(config-if)# ethernet cfm mip level 7
> Switch(config-if)# ethernet cfm mep level 4 mpid 100 vlan 10
> Switch(config-if)# ethernet uni id 2004-20
> Switch(config-if)# ethernet oam remote-loopback supported
> Switch(config-if)# ethernet oam
> Switch(config-if)# service instance 10 ethernet BLUE
> Switch(config-if-srv)# ethernet lmi ce-vlan map 10
> Switch(config-if-srv)# exit
>
> Provider-edge switch 2 (PE2) configuration:
>
> Switch# config t
> Switch(config)# interface gigabitethernet1/20
> Switch(config-if)# switchport mode trunk
> Switch(config-if)# ethernet cfm mip level 7
> Switch(config-if)# ethernet cfm mep level 4 mpid 101 vlan 10
> Switch(config-if)# ethernet uni id 2004-20
> Switch(config-if)# ethernet oam remote-loopback supported
> Switch(config-if)# ethernet oam
> Switch(config-if)# service instance 10 ethernet BLUE
> Switch(config-if-srv)# ethernet lmi ce-vlan map 10
> Switch(config-if-srv)# exit
>
> Customer-edge switch 2 (CE2) configuration:
>
> Switch# config t
> Switch(config)# interface gigabitethernet0/1
> Switch(config-if)# port-type nni
> Switch(config-if)# switchport trunk allowed vlan 10
> Switch(config-if)# switchport mode trunk
> Switch(config-if)# ethernet oam remote-loopback supported
> Switch(config-if)# ethernet oam
> Switch(config-if)# exit
>
>
> if anyone has any experience configuring this technology or setup please
> help us out..
>
> BR
>
> Tony
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Feb 25 2015 - 20:40:04 ART