Re: back to back frame-relay

Hi Tony
1. clear
2. it means I need inverse-arp enabled?

On 3/27/14, Tony Singh <mothafungla_at_gmail.com> wrote:
>
> two methods of achieving back to back frame relay
>
> 1. Need to turn off keepalives both ends else L2 process fails (as we're
> expecting LMI messages from provider)
> Or
> 2. Enable one end of the link to be frame-relay DCE type and by enabling
> frame-relay PVC switching on the same side, as you did (this simulates a DTE
> to DCE physical peering for which frame-relay LMI messages will be sent and
> received using default Cisco LMI type)
>
> --
> BR
>
> Tony
>
>> On 27 Mar 2014, at 08:07, _ _ <krzysiek.zalewski_at_gmail.com> wrote:
>>
>> Hi
>>
>> It is possible create b2b fr link in which:
>>
>>> keepalive must be on, and inverse-arp must be off
>>
>> --
>> Krzysiek
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>

-- 
Krzysiek
Blogs and organic groups at http://www.ccie.net