Re: back to back frame-relay

two methods of achieving back to back frame relay

1. Need to turn off keepalives both ends else L2 process fails (as we're expecting LMI messages from provider)
Or
2. Enable one end of the link to be frame-relay DCE type and by enabling frame-relay PVC switching on the same side, as you did (this simulates a DTE to DCE physical peering for which frame-relay LMI messages will be sent and received using default Cisco LMI type)

--
BR
Tony
> On 27 Mar 2014, at 08:07, _ _ <krzysiek.zalewski_at_gmail.com> wrote:
> 
> Hi
> 
> It is possible create b2b fr link in which:
> 
>> keepalive must be on, and inverse-arp must be off
> 
> -- 
> Krzysiek
> 
> 
> Blogs and organic groups at http://www.ccie.net
> 
> _______________________________________________________________________
> Subscription information may be found at: 
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net