RE: Cat3560 Eigrp Authentication

Can you paste sh run from both devices? Is there a space in the password or
control plane blocking? Does your log show authentication error?
On Dec 1, 2013 2:20 PM, "Daniel Barney Briseqo" <daniel.barney.b_at_hotmail.com>
wrote:

> Yep. Routing is enable.
> SW1#show versionCisco IOS Software, C3560 Software
> (C3560-ADVIPSERVICESK9-M),
> Version 12.2(44)SE, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2008 by Cisco
> Systems, Inc.Compiled Sat 05-Jan-08 00:15 by weiliuImage text-base:
> 0x00003000, data-base: 0x01900000
> ROM: Bootstrap program is C3560 boot loaderBOOTLDR: C3560 Boot Loader
> (C3560-HBOOT-M) Version 12.2(25r)SEC, RELEASE SOFTWARE (fc4)
>
> > From: markom_at_ipexpert.com
> > Date: Sun, 1 Dec 2013 08:57:58 -0800
> > Subject: Re: Cat3560 Eigrp Authentication
> > To: daniel.barney.b_at_hotmail.com
> > CC: ccielab_at_groupstudy.com
> >
> > Silly question - did you enable "ip routing"? What version of IOS is
> this?
> >
> > --
> > Marko Milivojevic - CCIE #18427 (SP R&S)
> > Senior CCIE Instructor / Managing Partner - IPexpert
> > :: Free Video Training: http://youtube.com/IPexpertInc
> > :: Social: http://twitter.com/@icemarkom | http://fb.me/ccie18427
> > :: IPexpert: http://www.ipexpert.com/Communities | +1-810-326-1444
> >
> >
> >
> > On Sat, Nov 30, 2013 at 7:37 PM, Daniel Barney
> > <daniel.barney.b_at_hotmail.com>wrote:
> >
> > > Hello everyone
> > > I am having trouble setting up EIGRP authentication, on a SVI ... Any
> > > recommendations?
> > >
> > > SW1(config)#int vlan 1026
> > > SW1(config-if)#ip authentication key-chain eigrp 200 LAB
> > > SW1(config-if)#ip authentication mode eigrp 200 md5
> > > SW1(config-if)#do sh run int vlan 1026
> > > Building configuration...
> > >
> > > Current configuration : 104 bytes
> > > !
> > > interface Vlan1026
> > > ip address 131.10.100.10 255.255.255.0
> > > ip authentication mode eigrp 200 md5 ----/ Key-chain command is not
> set!
> > > end
> > >
> > > SW1(config)#do sh ip eigrp 200 int det
> > > EIGRP-IPv4:(200) interfaces for process 200
> > >
> > > Xmit Queue Mean Pacing Time Multicast
> > > Pending
> > > Interface Peers Un/Reliable SRTT Un/Reliable Flow Timer
> > > Routes
> > > Vl1026 1 0/0 6 0/1 50
> > > 0
> > > Hello interval is 5 sec
> > > Next xmit serial <none>
> > > Un/reliable mcasts: 0/2 Un/reliable ucasts: 3/9
> > > Mcast exceptions: 2 CR packets: 1 ACKs suppressed: 2
> > > Retransmissions sent: 2 Out-of-sequence rcvd: 0
> > > Topology-ids on interface - 0
> > > Authentication mode is not set
> > >
> > > SW1(config-if)#do sh key chain
> > > Key-chain LAB:
> > > key 1 -- text "eigrp200"
> > > accept lifetime (always valid) - (always valid) [valid now]
> > > send lifetime (always valid) - (always valid) [valid now]
> > >
> > > Thank you all
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Dec 01 2013 - 14:26:45 ART