RE: Cat3560 Eigrp Authentication

Yep. Routing is enable.
SW1#show versionCisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M),
Version 12.2(44)SE, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2008 by Cisco
Systems, Inc.Compiled Sat 05-Jan-08 00:15 by weiliuImage text-base:
0x00003000, data-base: 0x01900000
ROM: Bootstrap program is C3560 boot loaderBOOTLDR: C3560 Boot Loader
(C3560-HBOOT-M) Version 12.2(25r)SEC, RELEASE SOFTWARE (fc4)

> From: markom_at_ipexpert.com
> Date: Sun, 1 Dec 2013 08:57:58 -0800
> Subject: Re: Cat3560 Eigrp Authentication
> To: daniel.barney.b_at_hotmail.com
> CC: ccielab_at_groupstudy.com
>
> Silly question - did you enable "ip routing"? What version of IOS is this?
>
> --
> Marko Milivojevic - CCIE #18427 (SP R&S)
> Senior CCIE Instructor / Managing Partner - IPexpert
> :: Free Video Training: http://youtube.com/IPexpertInc
> :: Social: http://twitter.com/@icemarkom | http://fb.me/ccie18427
> :: IPexpert: http://www.ipexpert.com/Communities | +1-810-326-1444
>
>
>
> On Sat, Nov 30, 2013 at 7:37 PM, Daniel Barney
> <daniel.barney.b_at_hotmail.com>wrote:
>
> > Hello everyone
> > I am having trouble setting up EIGRP authentication, on a SVI ... Any
> > recommendations?
> >
> > SW1(config)#int vlan 1026
> > SW1(config-if)#ip authentication key-chain eigrp 200 LAB
> > SW1(config-if)#ip authentication mode eigrp 200 md5
> > SW1(config-if)#do sh run int vlan 1026
> > Building configuration...
> >
> > Current configuration : 104 bytes
> > !
> > interface Vlan1026
> > ip address 131.10.100.10 255.255.255.0
> > ip authentication mode eigrp 200 md5 ----/ Key-chain command is not set!
> > end
> >
> > SW1(config)#do sh ip eigrp 200 int det
> > EIGRP-IPv4:(200) interfaces for process 200
> >
> > Xmit Queue Mean Pacing Time Multicast
> > Pending
> > Interface Peers Un/Reliable SRTT Un/Reliable Flow Timer
> > Routes
> > Vl1026 1 0/0 6 0/1 50
> > 0
> > Hello interval is 5 sec
> > Next xmit serial <none>
> > Un/reliable mcasts: 0/2 Un/reliable ucasts: 3/9
> > Mcast exceptions: 2 CR packets: 1 ACKs suppressed: 2
> > Retransmissions sent: 2 Out-of-sequence rcvd: 0
> > Topology-ids on interface - 0
> > Authentication mode is not set
> >
> > SW1(config-if)#do sh key chain
> > Key-chain LAB:
> > key 1 -- text "eigrp200"
> > accept lifetime (always valid) - (always valid) [valid now]
> > send lifetime (always valid) - (always valid) [valid now]
> >
> > Thank you all
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Dec 01 2013 - 13:03:04 ART