RE: Multicast traffic without pin neighborship

But how my end Cisco router is working.
There is just mroute towards juniper firewall.

Sent from my Windows Phone
________________________________
From: Kalpesh Chheda<mailto:kalpeshchheda_at_live.com>
Sent: b15/b11/b2013 22:22
To: Adesh Chaudhary<mailto:er.adeshchaudhary_at_gmail.com>
Cc: Cisco certification<mailto:ccielab_at_groupstudy.com>
Subject: RE: Multicast traffic without pin neighborship

Thanks,
Will confirm that with my FW team.

Sent from my Windows Phone
________________________________
From: Adesh Chaudhary<mailto:er.adeshchaudhary_at_gmail.com>
Sent: b15/b11/b2013 22:13
To: Kalpesh Chheda<mailto:kalpeshchheda_at_live.com>
Cc: Cisco certification<mailto:ccielab_at_groupstudy.com>
Subject: Re: Multicast traffic without pin neighborship

Do we have "ip igmp static-group" configured under interface? Used in lot
of places to make the traffic flow.

On Fri, Nov 15, 2013 at 9:41 PM, Kalpesh Chheda
<kalpeshchheda_at_live.com>wrote:

> Dear all,
>
> At our enterprise multicast setup. There is link between juniper firewall
> and
> Cisco router. PIM is enable on both the devices. And multicast is working
> fine. But there is no pim neighbor ship between this two devices. Is am I
> missing some thing?
>
> I don't have access of juniper FW.
>
> Sent from my Windows Phone
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

--
Thanks & Regards,
Adesh
Blogs and organic groups at http://www.ccie.net