I tried formatting the flash: but there is no command to erase the NVRAM
without logging in the IOS exec, so I stuck with the password.
From: Marko Milivojevic [mailto:markom_at_ipexpert.com]
Sent: Wednesday, November 6, 2013 12:48 PM
To: amin
Cc: Narbik Kocharians; Andy LaPorte; GS CCIE
Subject: Re: Password recovery issue
I would have to look in the docs how it actually works, but "boot
secure-config" might be the issue here. Have you tried formatting the FLASH
and erasing NVRAM?
On Wed, Nov 6, 2013 at 10:24 PM, amin <amin_at_axizo.com> wrote:
Using windows 8, and all the steps of the password recovery goes normal but
the router still load the startup-config and ask for the password.
From: Narbik Kocharians [mailto:narbikk_at_gmail.com]
Sent: Wednesday, November 6, 2013 9:23 AM
To: Andy LaPorte
Cc: amin; <ccielab_at_groupstudy.com>
Subject: Re: Password recovery issue
Are you using a MAC?
On Wed, Nov 6, 2013 at 8:37 AM, Andy LaPorte <andy_at_cloud9.net> wrote:
Did you try changing the config registry? You should be able to boot
without loading the configuration, enter enable mode, and the copy the
startup config to the running config.
http://www.cisco.com/en/US/products/hw/routers/ps259/products_password_recov
<http://www.cisco.com/en/US/products/hw/routers/ps259/products_password_recov
%0d%0aery09186a0080094675.shtml>
ery09186a0080094675.shtml
AndyL
Sent from my iPad
> On Nov 6, 2013, at 11:17 AM, "amin" <amin_at_axizo.com> wrote:
>
> Hi experts,
>
> I am facing a case that I can't make a password recovery for Cisco2851,
even
> I can reach the ROMMON, and I tried all the tricks even re-imaging, anyone
> know the exact configuration that lead to that and if there is any trick
to
> overcome it.
>
>
>
> Regards,
>
> Amin
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Thu Nov 07 2013 - 09:52:10 ART
This archive was generated by hypermail 2.2.0 : Wed Jan 01 2014 - 20:26:19 ART