Re: frame map ipv6

Next do debug frame-relay packet to ensure frame is built for echo-reply.

--
BR
Tony
Sent from my iPhone on 3
> On 8 Oct 2013, at 12:44, <dls152_at_cox.net> wrote:
> 
> Here is the output from debug ipv6 icmp. Ping is reaching from R1 to R2 but not making it back.  This is only happening when I use frame-relay mapping command.
> 
> R2
> 
> ar  1 01:02:11.655: ICMPv6: Sending echo request to 2001::5.
> *Mar  1 01:02:13.659: ICMPv6: Sending echo request to 2001::5.
> *Mar  1 01:02:15.659: ICMPv6: Sending echo request to 2001::5.
> *Mar  1 01:02:17.659: ICMPv6: Sending echo request to 2001::5.
> *Mar  1 01:02:19.659: ICMPv6: Sending echo request to 2001::5.
> 
> R1
> 
> 1 00:59:23.023: ICMPv6: Received echo request from 2011:3:3:3::7
> *Mar  1 00:59:23.023: ICMPv6: Sending echo reply to 2011:3:3:3::7
> *Mar  1 00:59:25.023: ICMPv6: Received echo request from 2011:3:3:3::7
> *Mar  1 00:59:25.023: ICMPv6: Sending echo reply to 2011:3:3:3::7
> *Mar  1 00:59:27.023: ICMPv6: Received echo request from 2011:3:3:3::7
> *Mar  1 00:59:27.023: ICMPv6: Sending echo reply to 2011:3:3:3::7
> 
> ---- dls152_at_cox.net wrote: 
>> Hello,
>> 
>> I am trying to figure out why I can't ping between two routers running OSPF v3. I am trying to map ipv6 between 2 frame-relay links. The ospf v3 neighbors are coming up but I can't ping remote loopback (2001::5). Any ideas? I know it has to do something with my mapping but I can't figure it out.
>> 
>> 
>> R1
>> 
>> interface Serial2/0
>> no ip address
>> encapsulation frame-relay
>> ipv6 address 2011:3:3:3::5/64
>> ipv6 address FE80::5 link-local
>> ipv6 ospf neighbor FE80::7
>> ipv6 ospf 100 area 0
>> no keepalive
>> serial restart-delay 0
>> frame-relay map ipv6 FE80::5 100
>> frame-relay map ipv6 FE80::7 100 
>> 
>> Neighbor ID     Pri   State           Dead Time   Interface ID    Interface
>> 2.2.2.2       1   FULL/DR         00:01:30    5               Serial2/0
>> 
>> R2
>> 
>> interface Serial1/0
>> no ip address
>> encapsulation frame-relay
>> ipv6 address 2011:3:3:3::7/64
>> ipv6 address FE80::7 link-local
>> ipv6 ospf neighbor FE80::5
>> ipv6 ospf 100 area 0
>> no keepalive
>> serial restart-delay 0
>> frame-relay map ipv6 FE80::5 100
>> frame-relay map ipv6 FE80::7 100
>> 
>> 
>> R2#sh ipv6 route
>> IPv6 Routing Table - 5 entries
>> Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP
>>       U - Per-user Static route
>>       I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary
>>       O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
>>       ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
>> O   2001::5/128 [110/64]
>>     via FE80::5, Serial1/0
>> C   2011:3:3:3::/64 [0/0]
>>     via ::, Serial1/0
>> L   2011:3:3:3::7/128 [0/0]
>>     via ::, Serial1/0
>> L   FE80::/10 [0/0]
>>     via ::, Null0
>> L   FF00::/8 [0/0]
>>     via ::, Null0
> 
> 
> Blogs and organic groups at http://www.ccie.net
> 
> _______________________________________________________________________
> Subscription information may be found at: 
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net