Here is the output from debug ipv6 icmp. Ping is reaching from R1 to R2 but not making it back. This is only happening when I use frame-relay mapping command.
R2
ar 1 01:02:11.655: ICMPv6: Sending echo request to 2001::5.
*Mar 1 01:02:13.659: ICMPv6: Sending echo request to 2001::5.
*Mar 1 01:02:15.659: ICMPv6: Sending echo request to 2001::5.
*Mar 1 01:02:17.659: ICMPv6: Sending echo request to 2001::5.
*Mar 1 01:02:19.659: ICMPv6: Sending echo request to 2001::5.
R1
1 00:59:23.023: ICMPv6: Received echo request from 2011:3:3:3::7
*Mar 1 00:59:23.023: ICMPv6: Sending echo reply to 2011:3:3:3::7
*Mar 1 00:59:25.023: ICMPv6: Received echo request from 2011:3:3:3::7
*Mar 1 00:59:25.023: ICMPv6: Sending echo reply to 2011:3:3:3::7
*Mar 1 00:59:27.023: ICMPv6: Received echo request from 2011:3:3:3::7
*Mar 1 00:59:27.023: ICMPv6: Sending echo reply to 2011:3:3:3::7
---- dls152_at_cox.net wrote:
> Hello,
>
> I am trying to figure out why I can't ping between two routers running OSPF v3. I am trying to map ipv6 between 2 frame-relay links. The ospf v3 neighbors are coming up but I can't ping remote loopback (2001::5). Any ideas? I know it has to do something with my mapping but I can't figure it out.
>
>
> R1
>
> interface Serial2/0
> no ip address
> encapsulation frame-relay
> ipv6 address 2011:3:3:3::5/64
> ipv6 address FE80::5 link-local
> ipv6 ospf neighbor FE80::7
> ipv6 ospf 100 area 0
> no keepalive
> serial restart-delay 0
> frame-relay map ipv6 FE80::5 100
> frame-relay map ipv6 FE80::7 100
>
> Neighbor ID Pri State Dead Time Interface ID Interface
> 2.2.2.2 1 FULL/DR 00:01:30 5 Serial2/0
>
> R2
>
> interface Serial1/0
> no ip address
> encapsulation frame-relay
> ipv6 address 2011:3:3:3::7/64
> ipv6 address FE80::7 link-local
> ipv6 ospf neighbor FE80::5
> ipv6 ospf 100 area 0
> no keepalive
> serial restart-delay 0
> frame-relay map ipv6 FE80::5 100
> frame-relay map ipv6 FE80::7 100
>
>
> R2#sh ipv6 route
> IPv6 Routing Table - 5 entries
> Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP
> U - Per-user Static route
> I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary
> O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
> ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
> O 2001::5/128 [110/64]
> via FE80::5, Serial1/0
> C 2011:3:3:3::/64 [0/0]
> via ::, Serial1/0
> L 2011:3:3:3::7/128 [0/0]
> via ::, Serial1/0
> L FE80::/10 [0/0]
> via ::, Null0
> L FF00::/8 [0/0]
> via ::, Null0
Blogs and organic groups at http://www.ccie.net
Received on Tue Oct 08 2013 - 07:44:04 ART
This archive was generated by hypermail 2.2.0 : Fri Nov 01 2013 - 07:35:39 ART