Re: Jumbo frame

From: Christopher Rae <chris.rae07_at_me.com>
Date: Wed, 21 Aug 2013 22:10:47 +0800

Remember it is just adding support for jumbo frames. Devices that use 1500 byte packets
it will continue to forward them with a 1500 frame.
If you have ISCI SAN replication between the sites then jumbo makes sense as the SAN
storage will be configured for 9000 byte packets.
If you dont have a requirement, then I would suggest to leave it at default.
If your worried about a performance hit on the 6k, I wouldn't worry about it, but just double
check that each line card supports jumbo frames.

On a slight tangent.....make sure your WAN provider can support it, end to end between your sites.
If he doesnt and you send him jumbo's, they will fragment.

Cheers
Chris Rae

On 21/08/2013, at 8:59 PM, Rati Berikaant Jokhadze <iinfo83_at_gmail.com> wrote:

> Its depends on the what is a purpose of wan link , you are using it for internet or mpls or something like this.
> i mean if you have l2 connectivity , bcause jumbo frame is l2 technology.
>
> if transit devices supports jumbo frames , this will not be a problem.
> And applications that using 1500mtu doesn't impact.
>
>
> On 08/21/2013 04:50 PM, Cikekhuah wrote:
>> Thanks Rati,
>>
>> What mtu value would you recommend on the 250mb wan interface? 9126 is from 1gb interface, is same advisable on this interface and how does it impact applications on servers using 1500mtu transiting the same link.
>>
>>
>> Sent from my iPad
>>
>> On Aug 21, 2013, at 1:40 PM, Rati Berikaant Jokhadze <iinfo83_at_gmail.com> wrote:
>>
>>> If the transit devices supports jumbo frames , then it makes sense
>>>
>>> On 08/21/2013 04:30 PM, Cikekhuah wrote:
>>>> Hello colleagues,
>>>>
>>>> I have a 1GB network infrastructure but would like to know the impact of configuring Jumbo frame support on my 250MB WAN link to my DRC site having Cisco 6509 switches at both locations. The link is terminated on 1GB interfaces but has 250MB capacity. I learnt it's advisable to configure 9126 mtu for 1gb but less for any value below this. Was wondering the best value to set for my scenario and the possible impact this could have on my other applications transiting this link but using 1500 mtu.
>>>>
>>>> Any suggestions?
>>>> Thanks
>>>>
>>>> Sent from my iPad
>>>>
>>>>
>>>> Blogs and organic groups at http://www.ccie.net
>>>>
>>>> _______________________________________________________________________
>>>> Subscription information may be found at:
>>>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at: http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Aug 21 2013 - 22:10:47 ART

This archive was generated by hypermail 2.2.0 : Sun Sep 01 2013 - 08:35:50 ART