Re: Security 4.0 hardware

I haven't taken the new lab so I don't know the exact point distribution, but I would assume you can't pass the lab without knowing these topics. I.e. you can't just learn the v3 topics alone and then expect to pass.

Brian McGahan, 4 x CCIE #8593 (R&S/SP/SC/DC), CCDE #2013::13
bmcgahan_at_INE.com<mailto:bmcgahan_at_INE.com>

Internetwork Expert, Inc.
http://www.INE.com<http://www.ine.com/>

On Aug 14, 2013, at 6:03 PM, "Travis Niedens" <niedentj_at_hotmail.com<mailto:niedentj_at_hotmail.com>> wrote:

Thanks for the update. What percentage would you say is different ? ISE, ACS 5, wireless and WSA must account for more than 20 points on the lab.

From: Brian McGahan [mailto:bmcgahan_at_ine.com]
Sent: Wednesday, August 14, 2013 3:50 PM
To: Travis Niedens
Cc: Dennis Worth; Cisco certification
Subject: Re: Security 4.0 hardware

Yes, it will be before the end of October for the updated ATC videos. I'm going to announce the specific class dates next week along with other details on our development schedule.

Keep in mind though that the vast majority is the same between v3 and v4. There are lots of new topics like ACS 5, ISE, WSA, and Wireless to name a few but most of the router, switch, and ASA topics are the same.

Thanks,

Brian McGahan, 4 x CCIE #8593 (R&S/SP/SC/DC), CCDE #2013::13
bmcgahan_at_INE.com<mailto:bmcgahan_at_INE.com>

Internetwork Expert, Inc.
http://www.INE.com<http://www.ine.com/>

On Aug 14, 2013, at 5:00 PM, "Travis Niedens" <niedentj_at_hotmail.com<mailto:niedentj_at_hotmail.com>> wrote:
Is there an ETA with INE will update the vids for 4.0 ? I can't wait to get
started on 4.0.

Travis

-----Original Message-----
From: nobody_at_groupstudy.com<mailto:nobody_at_groupstudy.com> [mailto:nobody_at_groupstudy.com] On Behalf Of
Brian McGahan
Sent: Wednesday, August 14, 2013 2:58 PM
To: Dennis Worth; Cisco certification
Subject: RE: Security 4.0 hardware

Hi Dennis,

INE supports the SCv4 topology. You can see the hardware layout for our
rack rentals here: http://ine.co/scv4diagram

The topology is actually quite extensive; it includes:

7 routers (ISR G1 and G2)
6 switches (3750-X and 3750)
4 ASAs (5515-X's and 5510's)
2 ACS version 5 servers
2 ISE servers
1 IPS 4240
1 WSA web proxy
1 Wireless LAN Controller
1 Wireless AP
1 IP Phone
4 Windows 7 VMs
4 Windows Server VMs

Feel free to get in touch with me offline if you have more specific
questions.

Thanks,

Brian McGahan, 4 x CCIE #8593 (R&S/SP/SC/DC), CCDE #2013::13
bmcgahan_at_INE.com<mailto:bmcgahan_at_INE.com>

Internetwork Expert, Inc.
http://www.INE.com

-----Original Message-----
From: nobody_at_groupstudy.com<mailto:nobody_at_groupstudy.com> [mailto:nobody_at_groupstudy.com] On Behalf Of
Dennis Worth
Sent: Wednesday, August 14, 2013 2:38 PM
To: Cisco certification
Subject: OT: Security 4.0 hardware

Anyone have any suggestions for procuring some hardware rack time with all
the necessary components to work through SEC 4.0 Blueprint?

Thanks,

--
Dennis Worth
Blogs and organic groups at http://www.ccie.net