ISIS Single-topology VS Multitopology Metric Query

Hi,

I was testing single vs multitopology for isis. I have incremented
Link-Metric for a specific interface, but noticed it only effects Ipv4
incoming routes but not Ipv6 incoming routes, is this expected ?

R5#show run int fa0/1
Building configuration...

Current configuration : 175 bytes
!
interface FastEthernet0/1
 ip address 23.0.0.1 255.255.255.0
 ip router isis 1
 duplex auto
 speed auto
 ipv6 address 2001:45::5/64
 ipv6 router isis 1
 isis metric 40
end

R5#show ipv6 route 2001::3
IPv6 Routing Table - 7 entries

I2 2001::3/128 [115/30]
[--------------------------------------------------> 30
     via FE80::C002:3FF:FEA0:1, FastEthernet0/1

R5#show ip route
     3.0.0.0/32 is subnetted, 1 subnets
i L2 3.3.3.3 [115/60] via 20.4.5.4, FastEthernet0/1 ------------------->
60

Thanks
Rakesh

Blogs and organic groups at http://www.ccie.net
Received on Sun Aug 04 2013 - 11:45:08 ART