NAT question on ASA 8.3 or above

Hello, Group

I'm currently working on NAT configuration on ASA 8.3, but my old
configuration didn't work on newer version.

I checked configuration guide and modified the following static NAT
configuration.
=====================================================================
Old(pre 8.3): static (outside,inside) 10.1.1.1 192.168.1.1 netmask
255.255.255.255

New(8.3): object network obj-192.168.1.1
                 host 192.168.1.1
                 nat(outside, inside) static 10.1.1.1
=====================================================================
I think it's correct configuration, but it didn't work properly. Any
correction? Please advise.

I have another configuration need to be checked. Please refer to the
following.
===========================================================
object-group network CLIENTS_REAL
 network-object 172.16.0.0 255.255.0.0

nat (inside,outside) source dynamic CLIENTS_REAL interface
===========================================================
In this case, I think configuration should remain the same on pre 8.3 and
8.3. Any opinion??

It would be greatly appreciated if anyone can give me some advice.

Regards,
----------------------------------------------
"An open mind opens doors."
夢は信じていれば必ず叶う瘢雹！！！
 Myung-Soo Ko (高 巳６柑洙)

Blogs and organic groups at http://www.ccie.net
Received on Wed Jul 31 2013 - 19:08:41 ART