Re: xconnect

Hi Mohammed

The other way to do this is to use L2tpv3 and in this case you dont
need to worry about MPLS

below is the config

*pseudowire-class 52*

*ip local interface lo0*

*encapsulation l2tvp3*

R2#sh run int s2/0

interface Serial2/0

 no ip address

 no keepalive

 serial restart-delay 0

* xconnect 5.5.5.5 16 pw-class 52*

R5#sh run int s2/0

interface Serial2/0

 no ip address

 no keepalive

 serial restart-delay 0

* xconnect 2.2.2.2 16 pw-class 52*

On Mon, Jun 17, 2013 at 9:48 AM, Mohammad Khalil <eng_mssk_at_hotmail.com>wrote:

> Hi
>
> I have established the below topology
> R1 - R2 - R3 - R4 - R5 - R6
> Where R1 , R2 , R3 resides in AS 100 and the other routers in AS 200
> I have established eBGP between R3 and R4 , OSPF is running in AS 100
> between R2 , R3 and ISIS in AS 200 between R4 , R5
> Then I have redistributed the R4 , R5 loopbacks in AS 100 , and vice versa
> for R2 , R3 loopbacks in AS 200 in order to get labels for these loopbacks
> What I have reached so far (i am trying to configure xconnect between R2
> and R5 with MPLS encapsulation) is the l2transport is up
>
> R2#sh run int s2/0
> interface Serial2/0
> no ip address
> no keepalive
> serial restart-delay 0
> xconnect 5.5.5.5 16 encapsulation mpls
>
>
> R5#sh run int s2/0
> interface Serial2/0
> no ip address
> no keepalive
> serial restart-delay 0
> xconnect 2.2.2.2 16 encapsulation mpls
>
> R2#show mpls l2transport summary
> Destination address: 5.5.5.5, total number of vc: 1
> 0 unknown, 1 up, 0 down, 0 admin down, 0 recovering, 0 standby, 0
> hotstandby
> 1 active vc on MPLS interface Fa1/0
>
> R5#show mpls l2transport summary
> Destination address: 2.2.2.2, total number of vc: 1
> 0 unknown, 1 up, 0 down, 0 admin down, 0 recovering, 0 standby, 0
> hotstandby
> 1 active vc on MPLS interface Fa1/0
>
> But no connectivity between R1 and R6 , what is missing ? I have tried to
> change the MTU to 1504 but nothing changed
>
> Thanks in advance
>
> BR,
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Jun 18 2013 - 10:35:58 ART