Re: show run "no auto-summary" command

I guess different versions of 15 code have different behaviors, because I
can see and change it with no problems, here:

R1#Show run | s router bgp
router bgp 100
 no synchronization
 bgp log-neighbor-changes
 neighbor 13.1.1.3 remote-as 100
 no auto-summary

R1(config)#router bgp 100
R1(config-router)#No aut
R1(config-router)#No auto-summary

System image file is "flash:c1841-adventerprisek9-mz.151-1.T2.bin"

So the default has changed but you can still change it if you like.

On Tue, May 28, 2013 at 6:57 AM, Cisco Fanatic <ebay_products_at_hotmail.com>wrote:

> I downloaded IOS 152-3.T3 version and I see that I can't configure "no
> auto-summary" command under eigrp and bgp?
>
> I can't see the "no sync" command under bgp? Can someone let me know why?
>
> !
> router eigrp 1000
> network 10.0.0.0
> !
> router bgp 64501
> bgp log-neighbor-changes
> neighbor 11.255.255.1 remote-as 200
> !
>
> Yuri
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
*Narbik Kocharians
*CCSI#30832, CCIE# 12410 (R&S, SP, Security)
*www.MicronicsTraining.com* <http://www.micronicstraining.com/>
Sr. Technical Instructor
YES! We take Cisco Learning Credits!
A Cisco Learning Partner
Blogs and organic groups at http://www.ccie.net