Re: Switchport MAC address

Does the server have reachability? Looks like your load balancing on po1 right, I have seen a wake on LAN case where device was powered off and it was showing the all broadcast mac-address

--
BR
Tony
Sent from my iPad
On 25 Mar 2013, at 05:22, ramesh Kumar <rameshkumar123321_at_yahoo.com> wrote:
> Hi,
> 
> I have a cisco series servers connected to one of my switchport. But my
> switchport is not learning the mac address from that. it just shows ffff. not
> sure why is it sending ffff as its own source address. tried clearing the mac
> table for that interface. still issue. Can i try anything else before i do a
> firmware restart on my server?
> 
> XYZ#sh mac add int g1/38
> Multicast Entries
> vlan    mac address     type    ports
> -------+---------------+-------+--------------------------------------------
> 834    ffff.ffff.ffff   system Gi1/8,Gi1/14,Gi1/20,Gi1/22,Gi1/32,Gi1/38
> 
>                          Po1
> 
> interface GigabitEthernet1/38
> switchport
> access vlan 834
> switchport mode access
> spanning-tree portfast
> end
> 
> Ramesh.
> 
> 
> Blogs and organic groups at http://www.ccie.net
> 
> _______________________________________________________________________
> Subscription information may be found at: 
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net