RE: Ospf Point-to-point to multipoint

Have you checked below things on all three of the routers.

What CEF is telling, are any unknown static routes are configured there, or any policy routing is there?
Because what ever you mentioned below its seems ok to me, and it should work properly.

----------------------------------------
> From: daniel.barney.b_at_hotmail.com
> Subject: Ospf Point-to-point to multipoint
> Date: Thu, 7 Mar 2013 15:53:23 -0600
> To: ccielab_at_groupstudy.com
>
> Hello there.
> In this topology, over frame relay:
>
> R1-----------R2
> |
> |
> R3
>
> -I only have frame relay maps from, R1 to R2 and from R1 to R3.
> -Frame relay between the spokes is not allowed
> -The spokes must be ospf network type point-to-point and the hub multipoint.
> -I have changed the hello timers, so neighbors are UP.
>
> I have connectivity from hub to both spokes, but I dont have from spoke to
> spoke.
> Is this a split horizon issue?
>
> Rutes are being propagated well, I have announced the loopbacks on ospf and I
> can see all of them on each router.
>
> Daniel Barney Briseqo
> "El zltimo minuto tambiin tiene 60 segundos"
> daniel.barney.b_at_hotmail.com
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Mar 10 2013 - 05:28:27 ART