Re: switchport question

Hi Ramesh,

That would be the case if the port were set to 'desirable'. However in this
instance it's hard coded to trunk and so the 'switcport access vlan x' is
doing absolutely nothing.

On Monday, February 25, 2013, Mohammad Mousa wrote:

> Ramesh
>
> As far as I remember the ports are dynamic in nature, that means the port
> ll try to become the trunk first and if it fails, it will switch back to
> the access mode.
>
> HTH,
>
> Mohammad Mousa
> CCIE #36990
>
> On Feb 25, 2013, at 5:59 PM, "ramesh Kumar" <rameshkumar123321_at_yahoo.com<javascript:;>>
> wrote:
>
> Hello,
>
> I see the below config under one of the switching interfaces. Access
> vlan and trunk vlan configured under one single physical interface. How
> would
> this switchport behave? access vlan should not be tagged and trunked vlans
> should be tagged. Trying to understand if this is a correct config. please
> help me verify.
>
> switchport
> switchport access vlan 454
> switchport trunk
> allowed vlan 44,454
> switchport mode trunk
>
>
>
> Thanks,
> Ramesh. K
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Thanks,
Steve Di Bias- CCIE #32840
Blogs and organic groups at http://www.ccie.net