Re: ppp Multilink

If there are authentication commands under multilnk interface then
individual member interface commands have no effect. if there aren't any
commands under multilink then member interface commands took effect.
for ppp chap authentication if there is no ppp chap authentication under
multilink then the individual memeber interfaces pp chap authentication
commands took effect but when I put ppp authentication chap under multilink
interface then doesn't matter if there are any ppp authentication on
members.
regards

On 17 January 2013 23:14, Marko Milivojevic <markom_at_ipexpert.com> wrote:

> Did RIP/EIGRP/OSPF authentication on members have any effect at all? :-)
>
> --
> Marko Milivojevic - CCIE #18427 (SP R&S)
> Senior CCIE Instructor - IPexpert
>
> On Thu, Jan 17, 2013 at 2:48 PM, Tauseef Khan <tasneemjan_at_googlemail.com>
> wrote:
> > While I labbed it up the authentication (both rip and Chap
> authentication)
> > took precedence over any individual commands on the member interfaces.
> > Theoretically, is this the correct behavior??
> >
> > Regards
> >
> > On 17 January 2013 21:54, Marko Milivojevic <markom_at_ipexpert.com> wrote:
> >>
> >> What happened when you tried? ;-)
> >>
> >> --
> >> Marko Milivojevic - CCIE #18427 (SP R&S)
> >> Senior CCIE Instructor - IPexpert
> >>
> >> On Thu, Jan 17, 2013 at 2:43 AM, Tauseef Khan <
> tasneemjan_at_googlemail.com>
> >> wrote:
> >> > Thanks for the explanation, For dynamic routing protocol
> authentication
> >> > or
> >> > ppp chap authentication is the same true as well that the
> authentication
> >> > on
> >> > Multilink interface will take precedence over the member interfaces
> >> >
> >> > regards
> >> >
> >> >
> >> > On 17 January 2013 04:12, Marko Milivojevic <markom_at_ipexpert.com>
> wrote:
> >> >>
> >> >> Yes it is :-)
> >> >>
> >> >> Btw. same logic holds true for EtherChannel links.
> >> >>
> >> >> --
> >> >> Marko Milivojevic - CCIE #18427 (SP R&S)
> >> >> Senior CCIE Instructor - IPexpert
> >> >>
> >> >> On Wed, Jan 16, 2013 at 7:16 PM, Joe Sanchez <marco207p_at_gmail.com>
> >> >> wrote:
> >> >> > I remember this being on one of Marko's labs ... Hehe
> >> >> >
> >> >> > Regards,
> >> >> > Joe Sanchez
> >> >> >
> >> >> > ( please excuse the brevity of this email as it was sent via a
> mobile
> >> >> > device. Please excuse misspelled words or sentence structure.)
> >> >> >
> >> >> > On Jan 16, 2013, at 5:26 PM, Marko Milivojevic <
> markom_at_ipexpert.com>
> >> >> > wrote:
> >> >> >
> >> >> >> If it's not specified on the Multilink interface, it will inherit
> >> >> >> cumulative bandwidth from each member. If it's specified on the
> >> >> >> Multilink interface, it will override individual member settings.
> >> >> >>
> >> >> >> --
> >> >> >> Marko Milivojevic - CCIE #18427 (SP R&S)
> >> >> >> Senior CCIE Instructor - IPexpert
> >> >> >>
> >> >> >> On Wed, Jan 16, 2013 at 8:08 AM, Tauseef Khan
> >> >> >> <tasneemjan_at_googlemail.com> wrote:
> >> >> >>> Does the ppp multilink configuration take presedecne over member
> >> >> >>> interface
> >> >> >>> individual configurtion? for example if I have bandwidth 2000
> >> >> >>> command
> >> >> >>> under
> >> >> >>> interface multilink1 and on member interface faces in have
> >> >> >>> bandwidth
> >> >> >>> 3000,
> >> >> >>> which one will take precedence?
> >> >> >>> regards
> >> >> >>>
> >> >> >>>
> >> >> >>> Blogs and organic groups at http://www.ccie.net
> >> >> >>>
> >> >> >>>
> >> >> >>>
> >> >> >>>
> _______________________________________________________________________
> >> >> >>> Subscription information may be found at:
> >> >> >>> http://www.groupstudy.com/list/CCIELab.html
> >> >> >>
> >> >> >>
> >> >> >> Blogs and organic groups at http://www.ccie.net
> >> >> >>
> >> >> >>
> >> >> >>
> _______________________________________________________________________
> >> >> >> Subscription information may be found at:
> >> >> >> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Jan 17 2013 - 23:30:19 ART