Re: Frame-relay traffic shapping

Tauseef,

I know as of the 12.2 you could only apply frame-relay traffic-shaping to
the main interface and not per-VC.

JS.

On Fri, Dec 28, 2012 at 8:43 AM, Tauseef Khan <tasneemjan_at_googlemail.com>wrote:

> Bit of confusion on Frame relay traffic shaping. appreciate if some one
> could calrify as its not clear on CCO docs
> Is it mandatory to use <frame-relay traffic shaping> on a frame-relay pvc
> or svc if I need to enable frame-relay traffic shapping with frame-relay
> class:
>
> I have the following config on a pvc:
>
> map-class frame-relay FRTS
> frame-relay cir 384000
> frame-relay bc 48000
> frame-relay be 96000
> frame-relay mincir 192000
> frame-relay adaptive-shaping becn
>
> int s0/0/0
> encap frame-relay
> frame-relay class FRTS
> frame-relay traffic-shaping ! <=============== wll the FRTS work without
> this command
>
> If have to enable service policy on the same interface (S0/0/0), is there
> a way of doing that as i can't also apply the service-policy if frame-relay
> traffic shaping is enabled on the interface
> thanks in advance
> &
> Kind regards
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Dec 28 2012 - 10:47:17 ART