Frame-relay traffic shapping

Bit of confusion on Frame relay traffic shaping. appreciate if some one
could calrify as its not clear on CCO docs
Is it mandatory to use <frame-relay traffic shaping> on a frame-relay pvc
or svc if I need to enable frame-relay traffic shapping with frame-relay
class:

I have the following config on a pvc:

map-class frame-relay FRTS
frame-relay cir 384000
frame-relay bc 48000
frame-relay be 96000
frame-relay mincir 192000
frame-relay adaptive-shaping becn

int s0/0/0
encap frame-relay
frame-relay class FRTS
frame-relay traffic-shaping ! <=============== wll the FRTS work without
this command

If have to enable service policy on the same interface (S0/0/0), is there
a way of doing that as i can't also apply the service-policy if frame-relay
traffic shaping is enabled on the interface
thanks in advance
&
Kind regards

Blogs and organic groups at http://www.ccie.net
Received on Fri Dec 28 2012 - 14:43:32 ART