RE: spanning-tree port-priority

It has to be applied on interface upstream of a root port that participates
in spanning-tree process. It doesn't have to be applied on root bridge to
work. It is easier to get working on a root bridge because any forwarding
port on down stream device to root bridge is a root port.
On Dec 9, 2012 3:09 AM, "Mohammad Khalil" <eng_mssk_at_hotmail.com> wrote:

> Spanning-tree port-priority command is applied on the root bridge , it's a
> value sent through BPDUs to the other switches
> If you want to make local effect , use the cost
>
> BR,
> Mohammad
>
> > Date: Sun, 9 Dec 2012 10:57:20 +0100
> > Subject: spanning-tree port-priority
> > From: benali.amin_at_gmail.com
> > To: ccielab_at_groupstudy.com
> >
> > Hi ,
> >
> > Applied the spanning tress port priority command on the router but seems
> > it does not take effect : has to be applied on the upstream router . can
> > someone clarify this ??
> >
> > Thanks in advance
> >
> >
> > Amine
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Dec 09 2012 - 06:18:54 ART